کرنل دیزایر اچ دی به نام KangBang Kernel
به نام خدا
Kang Bang kernel v3.3
مشخصات:
- Generally kept up to date with any new CM and QCom CAF display patches
- Always up to date with Linux Kernel 3.0* releases
- Built with the custom cfX-Toolchain. Check the toolchain changelog below for more info
- VDD SysFS interface for voltage modification
- Dynamic file syncing
- Fast Charge on demand (check the section below for full usage instructions)
- Two way call recording support
- VERY aggressive bus clocks
- FINALLY giving the performance of 2.6 back to us
- Everything else you're used to in the nightlies, and I'm already boring myself writing this [Only registered and activated users can see links. Click Here To Register...]
تغییرات:
کد:
v3.3:
Patched to LK 3.0.70
kernel common bcmdhd (wifi) driver via paulb-nl (fixed wifi related reboots)
fixed charging led behavior via paulb-nl
Some interactive changes from fyodor and upstream aosp kernel/common
block driver changes
switched to SIO by default
v3.2:
Patched to LK 3.0.66
Built with cfX-Toolchain 4.7-2013.2-1 (check kernel changelog)
v3.1:
Patched to LK 3.0.63
Patched BFQ to backported BFQv6
Switched IO Scheduler to BFQ by default
v3.0:
Upstream sync changes
Patched to LK 3.0.62
Switched to upstream lzo from xz (far faster and size doesn't matter <<<men take note)
A ton of optimizations from 3.4 kernel upstream, mostly vsprintf and assembly
BIG update, so check github for full commit log
Name courtesy of Lexmazter
v2.8.1:
Actually v2.8 and wifi fixed (new zip packing script)
v2.8:
Various compiling optimizations (cflags)
v2.7:
Patched to linux kernel 3.0.61
TONS of other stuff (too drunk for full changelog)
v2.5:
Increased pmem sizes back to the pre-vision sizes to hopefully fix the reboot issue
v2.4:
Built with cfX-Toolchain 4.7-2013.1-1 (check toolchain changelog below)
Patched to linux kernel 3.0.59 (check github for lk changelog)
SIO default IO scheduler again
BT up to date with CAF again
Implemented suspend/resume for cpufreq driver from CAF 3.4 kernel mako kernel
Dynamic fsync ported and enabled by default from faux123's android 3.4 mako kernel
v2.3:
Interactive gov up to date with AOSP kernel common and has a few tweaks by fyodor (juansheng)
Redid the lower voltages
Interactive gov is default and the recommended governor on SR4 and higher of cfX 4.2, or other roms which use a generic qcom PowerHAL
Edition name by Mustaavalkosta
v2.2:
Increase Pmem sizes (should fix random reboots)
Increase some parameters governing the random number generator
Switched to EBI0 from EBI1
Qdsp5v2: misc fixes
v2.1:
Built with cfX-Toolchain 4.7-2013.01 (check toolchain changelog below).
Patched to linux kernel 3.0.58
msm: cpufreq: Fix store_powersave_bias to account for sync' CPUs.
cpufreq: Add cpu utilization statistics to aid decisions made by user
msm: cpufreq: Fix the race between dbs_refresh and hotplug.
Input: Send events one packet at a time
msm_fb: Use an exclusive semaphore for Vsync IOCTL
msm: vidc: Fix buffer pool index
video: msm: Remove old post processing overlay integration
msm_fb: Avoid memset of frame buffer during early suspend
msm_fb: Update backlight level on resume after first pan display
msm_fb: display: Add timeout for waiting on update
Killer Bee name by Mustaavalkosta
v2.0:
Patched all the way up to linux kernel 3.0.57 (check git for full changelog)
New memory layout from fyodor's vision layout (gives 620mb available to system instead of 594mb)
Tons of CAF kgsl & video/fb commits
Lots of various staging commits
Some block changes
Added a perf defconfig, so only one branch is used now
v1.9:
Patched to linux kernel 3.0.54 (check git for full changelog)
v1.8:
patched to linux kernel 3.0.53 (check git for full changelog)
a few CAF video commits (check git for full changelog)
"Vertical line" bug fixed by paulb-nl
Headset button support fixed by ucxl
v1.7:
patched to linux kernel 3.0.52 (check git for full changelog)
quite a few CAF video commits (check git for full changelog)
v1.6:
Power imported from CAF
LOTS of kgsl/video/FB commits from CAF and CM's d2 kernel (for full changelog check git)
v1.5:
Patched to linux kernel 3.0.51
LOTS of android staging commits
v1.4:
[PERFORMANCE VARIANT] Re-enabled my aggressive bus oc config that somehow got disabled
regenerated the defconfig (kernel config) to include new Linux Kernel options
v1.3:
I patched to linux kernel 3.0.50
sched: Folding nohz load accounting more accurate
mmc: host: sdhci: Allow use of controller's native max blocksize
block/deadline: tweaked for better performance on android
Asynchronous I/O latency to a solid-state disk greatly increased
staging: android/lowmemorykiller: Do not kill kernel threads
SCHEDULER: Autogroup patch group by current user android UID instead of task id
lib: genalloc: back to CAF's version
v1.2:
Using -mfloat-abi=hard again (benefits performance in both kernels. Some devices may not boot the performance kernel again).
Built with the newest CFX-Toolchain (linaro gcc4.6.3 instead of 4.7.3 due to performance). Read HERE to see how it differs from AOSP or Linaro's.
1031 and higher of codefireX nightlies are also using this custom toolchain, so no need to flash stable on top of 1031 or higher.
v1.1:
[*patched to linux kernel 3.0.49. Changelog available HERE
mm: slab: update (simonsimons34)
Revert "Updated DS2746 battery driver" (paulb_nl - from my quick testing it seems to have fixed the battery jumps)
bcmdhd: allow only unicast packets when screen is off (paulb_nl)
lcdc_spade: spade_panel_sleep_in: do nothing (paulb_nl)
v1.0:
Reverted back to the heavily patched bfqv4 due to performance
Drop swap cache aggressively
Swaptoken only when swap full (better swap performance when swap is over half full)
v0.9:
Using CFX-Toolchain (4.7.3). Info can be found HERE
Patched BFQ to v5
Using new cflag optimizations
Some CAF display commits
zRam bug fixes
v0.8:
I patched to Linux Kernel 3.0.48. Full changelog available in the github commit message.
v0.7:
Imported CAF's ondemand gov
I patched to Linux Kernel 3.0.47
DeathRay Flashlight mode (very bright) now works
v0.6 (NO RandomBlame CM builds or nightlies older than 1016 will not be officially supported due to new qcom api):
Spent hours porting 32 fb/video/display commits to bring up to date with CAF and CM's samsung d2 kernel for the new QCom Display API (fast as ****)
Add full boost pulse support to interactive gov
USB and unknown chargers now use HTC's AC ChargeMode. This means it uses HTC's AC temperature limits, and will switch to USB cable status if too hot. This is the best of both worlds and the same as plugging into your AC charger.
Convert any oom_adj values to oom_score_adj values for backward compatibility.
Update rotator to with CAF's jb_chocolate rotator changes.
staging: android: lowmemorykiller: Don't count reserved free memory
cpufreq: interactive: run at fraction of hispeed_freq when load is low (final interactive commit to bring up to date with Google's interactive gov)
v0.5.1:
This is a stable kernel only change for stability (performance kernel is the same as v0.5)
Revert "arm: msm7x30: 1 higher pll2 clockstate to 1.7GHz+"
v0.5:
No more ****ty fast charge scripts (read new info).
Fast Charge now enabled by default on non usb storage devices (great for cheap car/wall chargers)
Added additional bus clockstate to stable kernel
v0.4.2:
Fixed the fast charge set on/off boot scripts FOR REAL
v0.4.1:
Fixed the fast charge set on/off boot scripts
v0.4:
Added fast charge, with enable/disable options
Made 1996/2016MHz clockstates more stable (at least for benchmarking)
v0.3:
I patched up to 3.0.46 Linux Kernel. Check either github link and click that commit for the full changelog listed in the commit summary.
v0.2:
Stability Improvements (reboot/blackscreen bug). These changes will be in the new nightlies as well. If you can't run the performance kernel, you still won't be able to. Stick with the nightlies or the "stable" kernel if on another JB build.
