دورد
قبل از هر چيز نميدونم جايي كه تايپك رو ايجاد كردم درست هست يانه .اگرنه عذرخواهي ميكنم در صورت امكان پستم رو محل مناسب خود انتقال دهيد
يك تبلت چيني دارم به اسمه
samsung t98
اين تبلت مشكلش اين هست كه موقعه تماس تصويرش بهم ميريزه ديوايس رو وايپو ريست كردم ولي درست نشد بدتر از همه اصلا فريموري نيست براي اين مدل حالا با سرچ در سايت هاي مختلف به رام كاستومي برخوردم كه براي cpu A13 ظاهرا جواب ميده ولي براي انجام ددان نياز به كد نويسي داره حالا نميدونم از كجا بايد شروع كنم
lsmod
ATTENTION: This rom is NOT compatible with faaastJB v2 rom, (You need to be in WORKING stock rom or faaastJB v1 to make all modules work)
FaaastJB v2 use a modified script.bin who BREAK modules in this ROM
To check what is your modules drivers, enter on terminal emulator or ADB and make:
Code: [Select]
andgetevent
Code: [Select]
lsmod
Check with
Code: [Select]
the loaded modules (CAMERA MODULES: HAVE "1" number after module name, example:gc0308 16888 1 - Live 0x00000000
Code: [Select]
getevent
this clear show gc0308 camera module loaded.
Code: [Select]
help you find touchscreen driver and also G-sensor driveradd device 1: /dev/input/event4
Example:
Code: [Select]
name: "gslx680"
add device 2: /dev/input/event3
name: "gt811"
add device 3: /dev/input/event2
name: "mxc622x"
add device 4: /dev/input/event0
name: "sun4i-keyboard"
Cleared show you "mxc622x" g-sensor module
"gslx680" touchscreen module
"gt811" in this case you need to test what is the proper touchscreen driver
After to know what is your driver, show the Proper patches and flash it!
Oh yeah welcome to test the most Smooth allwinner a13 CM10 rom!
- Install CWM
instruction here: [فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]
- Boot into CWM keeping pressed VOL- (MENU) and POWER for 3 secs, than release POWER and after another sec release VOL- (or use Novo7 tools if it doesn't work for your device)
- Select "wipe data/factory reset"
- Select "install zip from sdcard" -> "choose zip from sdcard" (or "choose zip from internal sdcard" if your files are into internal memory)
- Flash in this order:
1. ROM
2. JB G-apps
3. Compatibility patch (If available)
- Now go back, and select "Reboot system now"
- Enjoy CM10!
I have tested the rom with OEM A13 Tablet (Is smooth and stable)
I can play dead trigger
I will try to support the rom and custom kernel
Also if is posible, I will update to CM10.1
- If you wanna use the "phablet" ui change the entry "ro.disable_phablet_ui=1" to "ro.disable_phablet_ui=0" in file /system/build.prop
- If you wanna change external SD card for Internal change the entry "persist.sys.vold.switchexternal=0" to "persist.sys.vold.switchexternal=1" in file /system/build.prop
با سپاس از راهنمايي شما
موضوعات مشابه:
بوک مارک ها