[کرنل] [JB] کرنل گلکسی اس3 بنام Boeffla-Kernel 2.9 (آپديت5 فروردین)

[Corleone]

بنام خدا

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

Boeffla-Kernel 1.0

توضيحات :

اين كرنل توسط آقاي [فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ] ريليز شده كه از بزرگاني چون Chainfire و Ha*rdcore و Gokhanmoral و . . . كمك گرفته شده ، به گفته سازنده اين كرنل مصرف شارژي فوق العاده دارد كه از آندرولت شدن سي پي يو و جي پي يو اين امر حاصل شده

Features

* CPU undervolting interface
* GPU undervolting interface
* Bus undervolting interface
* Increased USB charging rate from 450 to 900 mA
* Increased charger charging rate from 1000 to 1100 mA
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging
* SD card read ahead buffer increased to 245kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler added (with slight tweaks)
* Wireless multicast ****** implemented
* Proportional rate reduction TCP implemented
* Configuration file for easy configuration of kernel without additional apps
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Kernel initialisation log file (with history of 3 log files)
* init.d support (automatic folder creation and permissions setting)
* Auto Root (disabled by default, latest supersu 0.97)
* exFat supported
* Triangle away supported
* Compiled with stock ARM toolchain
* Ram file system of latest firmware xxdlj4
* Source code base is GT-I9300_JB_Opensource_Update6

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود


نكته : دوستانيكه بعد از نصب كرنل ميخوان از حالت آندرولت خارج كنن و به تنظيمات اوليه كرنل برگردن ميتونن از Kernel Cleaning استفاده كنند (نصب از ريكاوري مود ميباشد)

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

موضوعات مشابه:

• |Kernel/Recovery| کرنل و ریکاوری گلکسی تب 10.1 بنام A1 Kernel V1.9/TWRP2.5.0.0 (قابل نصب بر روی سری P75XX)
• |Kernel| كرنل گلكسي نوت2 بنام WizDom13 Kernel v1.0.2
• |Kernel| كرنل گلكسي اس4 بنام Adam Kernel V1.0
• |Kernel| كرنل ایرانی گلكسي اس4 بنام Forious Kernel v0.1
• کرنل اکسپریا اس بنام XSX Kernel V3.2 (آپدیت: 26 آبان - پست 4)

[Corleone]

بنام خدا

Boeffla-Kernel 2.0

Changelog

* Black crush fix implemented
* Fixed auto root not always working

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اِي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.1

Changelog

    Tweaked lulzactive governor
    Maximum CPU frequency can now be set also in the configuration file (then it loads even during startup, contrary from using an app - you will see that in the used frequency chart directly after start)
    Boeffla-kernel config file is now much more "intelligent", it adds automatically new configuration options and removes old ones - you are never again required to delete the file by creating a new one and loosing your settings
    CIFS supported out-of-the-box (you can connect to windows shares by using e.g. the free CIFS manager app)
    Charging levels for AC and USB charger are now configurable via boeffla-kernel config file (and of course freely adjustable via sys file system)
    Fixed maximum CPU frequency not always limited (this is now different to stock kernel behaviour)

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.21

Changelog

* Boeffla-Sound engine to unleash the power of the Galaxy S3 audio chip
* Custom boot animation support
* CPU undervolting interface
* GPU undervolting interface
* Adjustable charger rate, defaults increased to 1100 mA for ac and 900 for USB
* Black crush fix for better balanced display
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler added (with slight tweaks)
* LulzactiveQ governor included (tweaked)
* Proportional rate reduction TCP implemented
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Kernel initialisation log file (with history of 3 log files)
* init.d support (automatic folder creation and permissions setting)
* Auto Root (disabled by default, latest supersu 0.97)
* CIFS compiled into kernel (no module loading required)
* exFat supported
* Triangle away supported
* Compiled with stock ARM toolchain
* Ram file system of latest firmware xxelk4
* Source code base is GT-I9300_JB_Opensource_Update6

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.3.1

Changelog

* Boeffla-Sound engine V1.3 to unleash the power of the Galaxy S3 audio chip
* Exynos vulnerability temporarily fixed by permission changes to 440 (if this breaks your camera, please flash this Camera fix in CWM - do not be confused about the file name, it works on all firmwares beginning with XXELK4 or newer)
* Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
* New governor zzmoove incorporated (focus on battery performance) - credits to ZaneZam and others (more info in Boeffla-Kernel thread on XDA developers)
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Implemented an additional recording preset: light, which is the less strongest of all now
* Implemented car dock support
* Added a new system tweak called "peg" which just adjusts the hotplug parameters of pegasusq slightly - rest is full stock settings
* Custom boot animation support
* CPU undervolting interface
* GPU undervolting interface
* Adjustable charger rate, defaults increased to 1100 mA for ac (usb stays on 475 mA per default)
* Black crush fix for better balanced display
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler added (with slight tweaks)
* LulzactiveQ governor included (tweaked)
* Proportional rate reduction TCP implemented
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Kernel initialisation log file (with history of 3 log files)
* init.d support (automatic folder creation and permissions setting)
* Auto Root (disabled by default)
* CIFS compiled into kernel (no module loading required)
* NFS compiled into kernel (no module loading required)* exFat supported
* Triangle away supported
* Compiled with stock ARM toolchain
* Source code base is GT-I9300_JB_Opensource_Update6

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.4-Beta4

Changelog

Fixed a bug in Boeffla-Sound engine with headphone detection in some rare scenarios
Boeffla-Tweak App supports the  following new functionalities with beta4: Reset of app settings, reset  of config file and folder, create debug information file for support  purposes
Boeffla Tweak app for configuration of  almost all kernel options in real time (credits to ZaneZam and  HM.Carbide for the basic app, the scripts and ideas) - should you not be  able to find the app in your app drawer, reboot again
ROW Scheduler
BFQ Scheduler
Config file is now again more  "dynamic", this means the values for the following 5 settings can now be  freely configured instead of choosing predefined values:  Headphone_Volume, Speaker_Volume, CPU_Max_Frequency, AC_Charge_Rate,  USB_Charge_Rate
New equalizer preset "custom" which  allows personal configuration of gains for all 5 eq bands by additional 5  entries in the config file (by that you can create your own preset)
Boeffla-Sound engine updated to version 1.4.1 in order to enable the above
Swap support added (not yet fully tested)

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.6

Changelog

* Boeffla-Tweaks app to configure most important kernel features via easy user interface
 * Configuration file for easy configuration of kernel without additional apps for many options
 * Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
 * Boeffla-Sound engine V1.4.2 to unleash the power of the Galaxy S3 audio chip
 * Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
 * Custom equalizer support via configuration file possible
 * Exynos vulnerability fixed (by Update7 sources)
 * Sudden death issue supposed to be fixed (by Update7 sources)
 * EMMC chip firmware data can be read via sysfs + included in debug info file
 * Custom boot animation support
 * CRT-OFF animation supported
 * CPU undervolting interface
 * GPU undervolting interface
 * Adjustable charger rate, defaults increased to 1100 mA for ac (usb stays on 475 mA per default)
 * Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
 * Touch boost switchable (default is on)
 * Black crush fix for better balanced display
 * SD card read ahead buffer increased to 256kb (can be disabled)
 * Ext4 File system tweaks (can be disabled)
 * System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
 * SIO scheduler (with slight tweaks)
 * ROW scheduler
 * BFQ scheduler (version v5r1)
 * ZZmoove governor (focus on battery performance)
 * LulzactiveQ governor included (tweaked)
 * Dynamic fsync implemented
 * Timeouts for external SD card changed to improve handling of crappy cards
 * Proportional rate reduction TCP implemented
 * Entropy generator for random data fixed
 * Car dock support
 * Swap support
 * init.d support (automatic folder creation and permissions setting)
 * CIFS compiled into kernel (no module loading required)
 * NFS compiled into kernel (no module loading required)
 * Auto Root (disabled by default)
 * exFat supported
 * Triangle away supported
 * Automatic EFS backup to external (priority) or internal SD Card (fallback)
 * Kernel initialisation log file (with history of 3 log files)
 * Disabled Android logger (can be enabled again)
 * Disabled Kernel logging (can be enabled again)
 * Compiled with stock ARM toolchain
 * Internal kernel busybox version 1.20.2
 * Ramdisk from XXELLA firmware
 * Source code base is GT-I9300_JB_Opensource_Update7

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.7.2

Changelog

* Boeffla-Tweaks app to configure most important kernel features via easy user interface
 * Boeffla-Tweaks app lets you do many other daily routine tasks such as: 
   - Wipe cache and dalvik cache
   - Reboot into recovery and download mode
   - Flash kernel directly from your sd card
   - Load latest stable or test kernel automatically and directly flash it
   - Toggle between MPT and UMS storage mode for external sd card
 * Configuration file for easy configuration of kernel without additional apps for many options
 * Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
 * Boeffla-Sound engine V1.4.9 to unleash the power of the Galaxy S3 audio chip
 * Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
 * Custom equalizer support via configuration file possible
 * LED fading can be enabled (for a demonstration video [فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]  - thanks to Andreas61 for recording the video) - Note: It does only  work for non-Samsung apps (does not work for missed calls, stock sms  etc!)
 * Increase brightness of notification LED for both blinking or fading
 * Exynos vulnerability fixed
 * Sudden death issue supposed to be fixed
 * EMMC chip firmware data can be read via sysfs + included in debug info file
 * Custom boot animation support
 * CRT-OFF animation supported
 * CPU undervolting interface
 * GPU undervolting interface
  * Adjustable charger rate, defaults increased to 1100 mA for ac (usb  stays on 475 mA per default) - you can now set USB charge down to zero,  so it does not load when you plug it into your PC to just transfer files  etc.
 * Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
 * Touch boost switchable (default is on)
* Black crush fix for better balanced display
 * SD card read ahead buffer increased to 256kb (can be disabled)
 * Ext4 File system tweaks (can be disabled)
 * System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
 * SIO scheduler (with slight tweaks)
 * ROW scheduler
 * BFQ scheduler (version v5r1)
 * ZZmoove governor (focus on battery performance)
 * LulzactiveQ governor included (tweaked)
 * Dynamic fsync implemented
 * Timeouts for external SD card changed to improve handling of crappy cards
 * Proportional rate reduction TCP implemented
 * Entropy generator for random data fixed
 * Car dock support
 * Swap support
 * init.d support (automatic folder creation and permissions setting)
 * CIFS compiled as a module (load module from /lib/modues if required)
 * NFS compiled as a module (load module from /lib/modues if required)
 * Auto Root (disabled by default)
 * exFat supported
 * Triangle away supported
 * Automatic EFS backup to external (priority) or internal SD Card (fallback)
 * Kernel initialisation log file (with history of 3 log files)
 * Disabled Android logger (can be enabled again)
 * Disabled Kernel logging (can be enabled again)
 * Disabled various debug logs and traces
 * Compiled with stock ARM toolchain
 * Internal kernel busybox version 1.20.2
 * Ramdisk from XXELLA firmware
 * Source code base is GT-I9300_JB_Opensource_Update7

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.8

Changelog

* Soft CPU overclocking to 1500 or 1600 MHz
* Governor profiles for pegasusq and zzmoove for performance, battery saving etc.
* GPU overclocking up to 700 MHz
* GPU undervolting / overvolting
* Boeffla-Tweaks app to configure most important kernel features via easy user interface (many features added with kernel 2.8)
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
*  Boeffla-Sound engine V1.6.0 to unleash the power of the Galaxy S3 audio  chip (latest new functionalities: speaker tuning, intelligent  microphone sensitivity setting for both recording and call,  call-detection, stereo expansion, mono downmix)
* Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
* Custom equalizer support via configuration file possible
*  LED fading can be enabled (for a demonstration video CLICK HERE -  thanks to Andreas61 for recording the video) - Note: It does only work  for non-Samsung apps (does not work for missed calls, stock sms etc!)
* Increase brightness of notification LED for both blinking or fading
* Exynos vulnerability fixed
* Sudden death issue supposed to be fixed
* Custom boot animation support
* CRT-OFF animation supported
* CPU undervolting interface
*  Adjustable charger rate, defaults increased to 1100 mA for ac (usb  stays on 475 mA per default) - you can now set USB charge down to zero,  so it does not load when you plug it into your PC to just transfer files  etc.
* Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
* Touch boost switchable (default is on)
* Black crush fix for better balanced display
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler (with slight tweaks)
* ROW scheduler
* BFQ scheduler (version v5r1)
* ZZmoove 0.3 governor (focus on battery performance)
* LulzactiveQ governor included (tweaked)
* Dynamic fsync implemented
* Timeouts for external SD card changed to improve handling of crappy cards
* Proportional rate reduction TCP implemented
* Entropy generator for random data fixed
* Car dock support
* Swap support
* init.d support (automatic folder creation and permissions setting)
* CIFS compiled as a module (load module from /lib/modues if required)
* NFS compiled as a module (load module from /lib/modues if required)
* Auto Root (disabled by default)
* exFat supported
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* Disabled various debug logs and traces
* Compiled with stock ARM toolchain
* Internal kernel busybox version 1.20.2
* Ramdisk from XXELLA firmware
* Source code base is GT-I9300_JB_Opensource_Update7

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

دريافت از آپلودسنتر انجمن تخصصي سياره پي دي اي

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]

[Corleone]

بنام خدا

Boeffla-Kernel 2.9

Changelog

* Soft CPU overclocking to 1500 or 1600 MHz
* Governor profiles for pegasusq and zzmoove for performance, battery saving etc.
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Boeffla-Tweaks app to configure most important kernel features via easy user interface
* Configuration file for easy configuration of kernel without additional apps for many options
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
*  Boeffla-Sound engine V1.6.0 to unleash the power of the Galaxy S3 audio  chip (latest new functionalities: speaker tuning, intelligent  microphone sensitivity setting for both recording and call,  call-detection, stereo expansion, mono downmix)
* Full configuration of Boeffla-Sound engine via Boeffla-Sound app from Google playstore possible
* Custom equalizer support via configuration file possible
*  LED fading can be enabled (for a demonstration video CLICK HERE -  thanks to Andreas61 for recording the video) - Note: It does only work  for non-Samsung apps (does not work for missed calls, stock sms etc!)
* Increase brightness of notification LED for both blinking or fading
* Exynos vulnerability fixed
* Sudden death issue supposed to be fixed
* Custom boot animation support
* CRT-OFF animation supported
* CPU undervolting interface
*  Adjustable charger rate, defaults increased to 1100 mA for ac (usb  stays on 475 mA per default) - you can now set USB charge down to zero,  so it does not load when you plug it into your PC to just transfer files  etc.
* Hardcore speedmod sharpness fix implemented (default is off, you have to enable it in the config file)
* Touch boost switchable (default is on)
* Black crush fix for better balanced display
* SD card read ahead buffer increased to 256kb (can be disabled)
* Ext4 File system tweaks (can be disabled)
* System Tweaks (Boeffla-Kernel tweaks is default, can be disabled or switched to Speedmod tweaks)
* SIO scheduler (with slight tweaks)
* ROW scheduler
* BFQ scheduler (version v5r1)
* ZZmoove 0.3 governor (focus on battery performance)
* LulzactiveQ governor included (tweaked)
* Dynamic fsync implemented
* Timeouts for external SD card changed to improve handling of crappy cards
* Proportional rate reduction TCP implemented
* Entropy generator for random data fixed
* Car dock support
* Swap support
* init.d support (automatic folder creation and permissions setting)
* CIFS compiled as a module (load module from /lib/modues if required)
* NFS compiled as a module (load module from /lib/modues if required)
* Auto Root (disabled by default)
* exFat support switchable (switch it off if you do not need it)
* Triangle away supported
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Disabled Android logger (can be enabled again)
* Disabled Kernel logging (can be enabled again)
* Disabled various debug logs and traces
* Compiled with stock ARM toolchain
* Internal kernel busybox version 1.20.2
* Ramdisk from XXEMR2 firmware
* Source code base is GT-I9300_JB_Opensource_Update8

طریقه نصب كرنل :

نسخه tar از محیط دانلودینگ و توسط برنامه odin نصب میشود و نسخه CWM از ریکاوری مود

[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ][فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]


[فقط کاربران ثبت نام شده قادر به مشاهده لینکها هستند . ]